K8200 3D Printer – Kit

399,00

The most hackable 3D printer!

Free shipping on this item!

K8200

In stock

EU shipping in 1 to 5 days
illustrated online manuals
safe online payment methods
14-day unmodified return policy

Description

  • dimensions of printable area: 20 x 20 x 20cm / 7.87 x 7.87 x 7.87″
  • heated bed: max. temperature 60°C
  • extrusion nozzle: 0.5 mm
  • extruded aluminum profiles: 27.5 mm / 1.08″ wide
  • movement: 4 NEMA 17 stepper motors
  • compatible filament: 3 mm

Check out all features and specs here!

 

 

This DIY 3D printer kit prints objects of maximum 20 x 20 x 20 cm by using different kinds of filament with a diameter of 3 mm. The K8200’s print bed is heated so your printed parts will come off easy!

Because the printer is made out of aluminum profiles it is fun to assemble and it also leaves room for the user to freely alter the machine and modify it to their liking. Try hacking it with a paste extruder or enlarge the build plate to twice its size with our custom add-on kits (warning: for advanced makers only).

The K8200 is completely open-source and it is compatible with all free RepRap software and firmware.

Downloads

Repetier software

Before you can start 3D printing, you will need a 3D design of something that you want to 3D print and you will need to ‘prep’ it for your K8200. To ‘prep’ this design, you will need a custom software called Repetier. Just download our customized Repetier Host, install it and start printing, it is easy as that. No more troubles with driver installation or fiddling with settings and config files. This leaves more time for creativity. Try it now!


Latest Firmware

      • Firmware K8200 V2.1.1
        This version supports the K8204 Z AXIS UPGRADE ROD AND COUPLER FOR K8200 and the VM8201LCD and SD card controller. DO NOT FORGET TO RESET YOUR EEPROM SETTINGS AFTER THE UPGRADE!. Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm.
      • Firmware K8200 V2
        This version supports the VM8201 (LCD and SD card controller).
        Version 2 of the k8200 firmware called Marlin based on Sprinter and grbl Reprap firmware. Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm.
      • Firmware K8200 V1
        Version 1 of the k8200 firmware called Marlin based on Sprinter and grbl Reprap firmware. Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm.

Glass plate clip

Use these clips (4x) to clamp the GP8200: GLASS PANEL FOR 3D PRINTER (215 x 215 x 3 mm) glassplate tot the printing bed. – Download


STAND-ALONE CONTROLLER FOR K8200


Boardcover


Fan nozzle

      • K8200 Fan nozzle .stl
        .STL 3D file for the fan nozzle (needs to be sliced before you can print this file, see the manual how to do this).
      • K8200 Fan nozzle .GCODE
        .GCODE file for the fan nozzle (can be printed directly with a K8200).

Manual

Download the assembly and user manual here:

Warnings

WARNINGS:

  • This product requires assembly.
  • Reasonable mechanical, electronics and computer skills are required.
  • This product requires a computer running Windows, MacOs or Linux and internet access.
  • Only unmodified, completely & correctly assembled kits qualify for inspection/repair by our service dept.

DETAILED MANUAL

Please follow the assembly and user manual closely and pay attention to the safety information. If you do not assemble or use the printer accordingly, Velleman nv. is not reliable for any personal injury or damage to your property. This will also result in an invalidation of the warranty.

GENERAL INFORMATION

The quality of a good 3D print not only depends on your 3D printer but also on the combination of its environment, the desired 3D printed object and the filament material which is being used. Other factors that may influence your 3D print quality include a breeze or ventilation nearby, room temperature and a greasy build bed. Therefore, it is advised to clean the build bed before each new print job! You will also have to experiment multiple times with adjustments of the previously mentioned factors in order to get the best printing results. The best way to do this is to tackle the adjustment process one factor at a time and only adjust it by small amounts. But don’t worry; this is where the fun begins!

SAFETY INFORMATION

General

The 3D printer is not intended for use by persons (including children) with reduced physical, or mental capabilities, or lack of technical experience and knowledge unless they are under supervision or instruction concerning the use of the appliance by a person responsible for their safety. • Always take safety precautions when operating the 3D printer in the proximity of children and/or pets. • Always place the 3D printer on a firm and stable surface. • Do not leave the 3D printer unattended when in use. • Do not place the 3D printer in the proximity of an open window or door. • Do not expose the 3D printer to extreme temperatures, rain or heavy quivering. • Performing unauthorized adjustments (adjustments not approved by Velleman nv) or deviating from the assembly and/or user manual are forbidden and will annul the warranty. • Should you have technical questions about the manual or the product, feel free to read around and discuss such topics on our forum.velleman.eu.

Mechanical

Do not reach into the 3D printer while it is operating. The moving parts can be damaged or cause injuries. • Do not cover the ventilation on the bottom of the 3D printer. • Do not apply force to any plastic or mechanical parts of the 3D printer. This will undo the warranty and may result in damage. • It is normal for your 3D printer to make soft and humming noises while operating. However; loud, squeaking or cracking noises are not normal and indicate a problem. In this case, consult the manual or our forum.velleman.eu.

Electrical

Always keep the surface above, underneath and around the 3D printer clear of dirt, obstacles and liquids. • Always use the included power supply which meets all the applicable European requirements and bears the CE-mark. It is protected against overload and short circuit so it does not need to be modified. The working Voltage of the 3D printer is 15Vdc (extra low voltage).

Health

Always analyze the filament materials you want to use prior to 3D printing in order to prevent the development of toxic gases. Inform yourself about suitable filament materials that do not generate dangerous vapors or gases. In any case, always operate the 3D printer in a well-ventilated room to dilute possible chemical vapors. • Do not under any circumstances touch the nozzle during or right after operation. The nozzle temperature can reach up to 300°C and can cause a serious risk of burns.

Warranty and support

Return policy; if you wish to return your 3D printer for service, the product and packaging must be in its original state. If this is the case, you may create a return ticket via support.velleman.eu . • Support policy; if you have specific technical questions about your 3D printer that cannot be answered by our forum.velleman.eu, you may create a support ticket via support.velleman.eu . • Spare part policy; in the unlikely case that your 3D printer is incomplete due to a production error, you may create a spare part ticket via support.velleman.eu , after approval we will send you the missing part.

Need some help or inspiration? Go to our forum and chat with other makers!

Reviews

There are no reviews yet.

Be the first to review “K8200 3D Printer – Kit”

Your email address will not be published. Required fields are marked *

You may also like…

  • Glass Panel for K8200 3D Printer (215 x 215 x 3 mm / 8.46 x 8.46 x 0.12″)

    6,90
    Read more
  • Extension set for K8200 3D Printer

    149,00
    Read more